If the current transformer is cut off at a large current, or the secondary winding is accidentally opened during operation, and after a test with a DC current, residual magnetism may occur in the core of the transformer, which will reduce the magnetic permeability of the core. Affects the performance of the transformer; therefore, before…
1.When the current increases, the magnetic density of the core also increases proportionally. At this time, the magnetic permeability μ and the loss angle ψ also increase, the error of the transformer decreases, the ratio difference decreases, and the phase difference decreases much. 2.The error is inversely proportional to the square of the number of…
The primary winding structure of the current transformer has two forms of single-turn type and multi-turn type. Single-turn type: The winding is only one turn at a time, and the structure is relatively simple. The primary current is more than 300 to 600A. It is divided into two types: bar type and bus bar type.…
Current transformer is mainly composed of a primary winding,a secondary winding and an iron core, and there is insulation among the primary, secondary and iron cores. In order to improve the accuracy of the current transformer, the error of the current transformer is generally compensated.In addition to the above-mentioned primary and secondary windings and cores,…
The current transformer is very similar to the transformer. The transformer is mainly used to change the voltage of the line on the line, while the current transformer is mainly used to change the current of the line. Why do we need variable current on the line? This is because according to the different conditions…