Generally, there are four types of leakage currents: semiconductor component leakage current, power supply leakage current, capacitor leakage current and filter leakage current 1. Leakage current of semiconductor components The very small current that flows through the PN junction when it is turned off. D-S is forward biased, G-S is reverse biased, and after the…
As the world’s largest consumer of new energy electric vehicles, new energy electric vehicles are developing rapidly, and the safety of electric vehicle charging piles is a top priority: whether the electric vehicle charging pile can avoid random plugging and unplugging during the charging process. The accident caused by the charging gun, whether it can…
Ratio difference: The fault of the transformer includes both the ratio difference and the angle difference. The ratio error is abbreviated as the ratio error, which is usually indicated by the symbol f. It is equal to the difference between the actual secondary current and the primary current converted to the secondary side and the…
From the image above, we can see that the three-phase power line and neutral line from the circuit breaker to the electrical equipment pass through the zero-sequence current transformer, and after the secondary winding of the differential current transformer is processed by the RCD detection and control device, to control the circuit breaker to trip. This is how the leakage…
The extensive application of nonlinear loads in power grids brings a series of problems harmonic wave. The main hazards of harmonic wave include: Increase the load of power facilities, reduce the power factor of the system, reduce the effective capacity and efficiency of power generation, transmission and electrical equipment, resulting in equipment waste, line waste and power loss;…
Split core current transformers are often used in equipment and have excellent induction effects, which can improve the use efficiency of equipment, have a good effect in controlling current, and complete the conversion of upper and lower voltages. How should we fix it in order to make it work smoothly and avoid vibration? Xiamen ZTC…